Abby Manufacturing Company, II, d/b/a Midsouth Custom Fabrication

by Taylor Auction & Realty, Inc.


September 24, 2009 Thursday September 24 @ 10:00am Central


Abby Manufacturing Company 835 Hwy. 178 Holly Springs, MS


Online Only


A Total Liquidation of Real Estate & Equipment of Abby Manufacturing Company. An Excellent Opportunity to Purchase Heavy Duty Fabrication Equipment AND Real Estate.

Share This Auction

Taylor Auction & Realty, Inc. will Liquidate Abby Manufacturing Company, II, d/b/a Midsouth Custom Fabricators
835 Hwy. 178
Holly Springs, Ms. 38635
Auction Date: Thursday, September 24 @10:00 am
Approved Insured Riggers List:

Mr. Phillip Lewis
S & R Rigging
Cell Phone No: 901-258-0716
Office No: 901-358-9116
Email: [email protected] 

E & R Crane & Rigging
Mr. Wilford Brossett
Phone No: 901-775-5195
Email: [email protected]  

Real Estate Information:
According to  information provided,  the property consists of approximately 26.73 acres of land located at the northwest quadrant of highway 178 and Neely Avenue within the corporate limits of Holly Springs, Mississippi. The subject is zoned I-1, Light Industrial District, by the city of Holly Springs.
The subject is improved with two industrial buildings. Building #1 is a masonry and steel frame, metal clad office/manufacturing building containing approximately 69,905 square feet of gross building area. Building #2 is a steel frame, metal clad warehouse building containing approximately 30,000 square feet of gross building area, for a combined total of 99,905 square feet of gross building area.
Abby Manufacturing Company "Midsouth Custom Fabricators" was a Heavy Duty/Industrial Fabrication Company Located in Holly Springs, Mississippi.
Listing of Fabricating Machinery:
  • Straight Side Press, Bliss, Model S2150-60-48, 150 Ton Capacity, 60" X 48" Bed, 4" Bolster Plate, 19" X 15" Windows, 65-1/2" Between Columns, Air Clutch, Air Brake, Palm Button Station with Dies, S/N:H47903, Plate, *Plate Turning Roll, 48" Length, Motorized, Approx. 16 Gauge Capacity.
  • Power Washing Unit, Steel Eagle, with Operator Station Hose, Wand, S/N:5546,
  • Degreasing Station, Ultracept, Oil Water Separator, with Water Supply Tank, Dipping Tank, Heating Element, 4’ X 4’ Cleansing Tank Capacity, Burner, Model WB-50R, 250 Volts, S/N:WO298-7950,
  • Cleaning Unit, Hypo System 1600, with Exhaust Tank, Stainless Steel,
  • CNC Press Brake, Amada, Model RG-50, 50 Ton Capacity, Bending Length 82", Distance Between Uprights 59.9", Throat Depth 15.76", Stroke 3.94", Set Up as a Finger Brake with Dies, Amada NCS-EX2 CNC Controls, Operator Pendant Control, Hydraulic, Tooling,
  • Press Brake, Cincinnati, Model 350CB, 14’ Overall Length, 350 Ton Capacity, 10" Stroke, No Back Gauge, No Front Support Arms, Palm Button Stations, Hydraulic, Bed and Ram, 148" Between Uprights, S/N:41125,
  • Turret Punch, Amada, Vela 2-305C, Thin Turret, 30 Ton Capacity, 56 Turret Stations, Mfd. 1979, LED Computer Controls, S/N:B2 55091,
  • Turret Punch, Amada, Vipros, Model 367 Queen, 30 Ton Capacity, GE Fanuc 18P CNC Controls, with Data Protect, with Yuken Hydraulic Unit, 1-Burner, Technotrans America, Model EX 5.5, 68000 BTU Per Hour, Turret Positions, (1) 44" X 60" Table, Roller Table on the Side, S/N:ANP67022,
  • Press Brake, US Industrial Machinery, Model US15512, 155 Ton Capacity, 138" Bed and Ram, Finger Dies on Ram, 128" Between Centers, Operator Pendant Control Station, Palm Buttons, Floor Flush, S/N:W2004-106,
  • CNC Press Brake, Toyokoki, Model HYB-125, 125 Ton Capacity, 200 MM Stroke, 3000 MM (120" Bed Length), Throat Depth 410 MM, 102" Between Housing, CNC Back Gauge, Toyokoki High Bread Servo CNC Controls, S/N:7002485,
  • CNC Laser Cutter, Amada, Model F0-3015, with Fanuc Model c4000 CNC Controls, Ffd. 2000, Fanuc Series 1601L CNC Controls, Operator Controls Station, Pallet Station with (2) 60" X 120" Tables, Full Enclosure, Amada pressure Control Unit, Model FS 1601LA-F3 EXP, Ffd. Oct. 2000, S/N:0231000010,
  • CO2 Laser, Mitsubishi, Model ML3015LZP, Mfd. 1999, Table 60" X 120", with Acu Chiller LX2, S/N:ML30200, *
  • Shear, US Industrial Machinery, Model 10375, 10’ Cutting Length, Hydraulic Hold-downs, Finger Guard, Front Support Arms, Roller Bearing Tables, Front Operated Back Gauge, S/N:J2002-17,
  • Filtration System, Torit, 9-Bag Style, Operator Control Station, Air Receiving Tank, Model ADF3-18, S/N:72725701.
  • Horizontal Band saw, Doall, Model C-916SA, Automatic, 9" X 16" Capacity, Automatic Stock Feed, Vises, Coolant System, Mitering Capabilities, S/N:508-95159,
  • CNC Robot, ABB, (1)Control Box, Air Equipment, Mfg. Plate Not Visible,
  • Powder Coating System, Nortson Consisting of: (2)Baking Ovens, (1)Drying Oven, Spray Booth, Exhaust Hoods, Electrics, Motors, Washer, Chain System, Hand Guns, Etc. Welder, Lincoln, Model 275, AC/DC, 275 Amp, Portable, Aluminum, *Scissor Lift, Approx. 20’ Lift Capacity, Portable, Battery Powered,
  • Sheet Lifter, Anver, Model M82M6-86-3/44, 820 LB.  Capacity, (8) Suction Cups,
  • Air Compressor, Kellogg, Cyclon, Mfg. Guards Off, Rotary Screw,
  • Air Dryer, Ingersoll Rand, Model TZ220, (2) Air Receiving Units,
  • Drill Press, Machinery SA Company, 8" X 36" Table, Manual Quill Down Feed,
  • Multi-spindle Drill Table, with 4 Drills, on 20" Centers,
  • Horizontal Band saw, Doall, Model C330, CNC (Set up with UNIOP Controls), 9" X 16" Capacity, Hydraulic Vise, Gravity Conveyor, Coolant System, S/N:52197212,
  • Welder, Esab, Model 353PC, 350 Amp, with Mig 4HD Wire Feeder, Portable,
  • Chop Saw, Milwaukee, 14" Capacity, Catalog 6176-20, S/N:96869053930753,
  • Welder, Esab, Model 352CVM, with Wire Feeder, S/N:NE1810215, Portable,
  • (2)Welder, Miller, Model CP-250TS, DC, 250 Amp, with Miller Wire Feeder, Portable, S/N:JH26496,
  • (3)Welder, Miller, Wire Feeder, CP-302,
  • Miller DC Plasma Cutting System, Spectrum 750, 120 Volts, 70Amp, S/N:KC245024, Dust Collection System; (2)Blowers, (2)Motors, Duct Work, 50 HP Motors, S/N:88-69570-1-2,
  • Sheet Un-coiler, American Steel Line, Model 60, 25000LB. Capacity Mfd. 1990, S/N:8708,
  • Plasma Cutter, Esab, Model Shadow, CNC Control, PC Based, with Esab Blower Motor, ESP-100I Welder, 12’ X 7’ Water Table, *
  • Air Compressor, Solair, with Receiving Tank, Rotary, Screw,
  • Monorail System, 2-Ton Capacity Arco Wright-Way Hoist, Pendant Control, Approx. 82’ X 36’ Capacity, with I-Beams and Cross Rails and Electrics,  
  • Caterpillar Forklifts -- (6) Salvage Units
  • Razor Zero Turn Lawnmower
  • Kalmar T50 TX Forklift, Sn 583681A
  • Kalmar T50 TX Forklift  Sn 584658A (Salvage)
  • 1997 International 4700 Truck Flat Bed (Salvage)
  • Tennant 5700 Floor Sweeper
  • Caterpillar V-155 Forklift ( Needs Repairs)
  • Pallet Shelving
  • Hand Tools
  • Welders, Lincoln, Miller * Wire & Arc (salvage)
  • Air Compressors
  • Drill Bits of all types
  • Storage Bins
  • Welding Tables
  • Swivel Jib Cranes
  • Welding Curtains 
Office Equipment:
  • Copier, Cannon, Image Runner 3300, Document Feeder. 
  • Executive Desk, Wood, Overhang, Double Pedestal, With Credenza and File Cabinet
  • Sofa and Love Seat Combo, Leather, Matching
  • Matching Leather Chairs
  • Executive Chair
  • Printer, Hewlett Packard, Design Jet 430, Large Printer
  • Plotter, Hewlett Packared, Model 7580B, S/N: 2402A04126
  • Assorted Office Partitions
  • Executive Desk, with Hutch, Bookcase and Credenza, Executive Chair
  • Copier, Sharp, Model AR407
  • Computers, Assorted
  • Computer Printers, Assorted
  • L-Shaped Desks, Assorted


Personal Property Terms:

*10% buyers premium is in effect for this auction.

*Everything sells As-Is.

*Payment must be made day of auction. Wire transfers will be accepted with prior Auction Company approval. Letter of credit must accompany your personal or company check.

*Mississippi Sales Tax rules will apply.

Real Estate Terms:

10% Buyer's Premium in Effect.

*An earnest money deposit equal to 10% of the contract purchase price will be payable on the day of auction with the balance due within 30 days.

*Real Property Selling As-Is

*Seller to Convey Marketable Title and is Responsible for Deed Preparation

*Taxes to be Prorated

*All other Closing Costs Responsibility of Purchaser Unless a Mutual Agreement Between Buyer and Seller Takes Place in Reference to other Closing Negotiations.

***The IRS has the right to redeem the real estate 120 days from the date of May 29, 2009

Conducted By

Taylor Auction & Realty, Inc.

Office: 1.662.226.2080

Ask The Auctioneer